Sunny Studio - Wonky Windows Underwater Shaker Card

jeudi 19 mai 2022

Hey there,

I'm so happy to be back on Sunny Studio blog with this bright and cute underwater card showcasing the new Wonky windows die. When I saw this new die from Summer release, I immediately thought of making a shaker card with it, so here we go!

I stamped the images first using an alcohol marker friendly black ink, I cut them all using the coordinating dies, and then colored everything using my alcohol markers. We have underwater critters and seaweeds from Fintastic friends and from Best fishes, I also picked the small rocks from Savanna safari, and the grass sprigs from Bunnyville to make more seaweeds.

Next I created my underwater panel. I cut a 5,5 x 4,25" bristol panel and used four oxide inks to make it, from bottom to top: salvaged patina, peacock feathers, ribbon prize and a teeny tiny bit of black soot.


Once my underwater panel was dry, I used the Wonky windows die to cut six openings out of it. I taped the die on one half of the panel, and sent it to my die cutting machine. I kept the inside pieces in the same order and set them aside, and I did the same thing on the other half of the panel. I flipped the die so that the bottom windows wouldn't be the same as the ones at the top and taped the die to the paper, and I sent it to my die cutting machine to cut three more openings and this way get a 3 x 2 grid.


Next I temporarily taped my six window panel to a card base, and I attached the inside pieces on the matching window. I removed the six window panel, and then created the shaker. I stuck a piece of clear acetate at the back of the panel, also added foam strips at the back to divide the six windows and make room for the shaker accessories, and before adding those shaker accessories, I just added powder inside the six windows, all along the edges, this way the jewels won't stick to the foam,

I cleaned the acetate using a microfiber cloth to remove the powder excess, I added a few clear jewels on each inside piece, and I finally attached my six window panel on top of the card base to totally close and complete my underwater shaker panel. And next I stuck all my cute images using glue dots mostly, and also foam squares at some places.


The last thing I did was creating the sentiment. I didn't want it to cover too much of the images, so I went with vellum. I white heat embossed the banner from Little birdie, and inside that banner I also white heat embossed "You're fintastic", I used the coordinating die to cut that banner that I finally attached in the middle of the card using three tiny dots of liquid glue.


VIDEO



SUNNY STUDIO SUPPLIES
- Wonky windows die
- Fintastic friends stamp set
- Best fishes stamp set
- Savanna safari stamp set
- Bunnyville stamp set
- Little birdie stamp set


OTHER SUPPLIES
- Spectrum Noir markers
- Graph'it brush markers
- Oxide inks: salvaged patina, peacock feathers, prize ribbon, black soot, chipped sapphire
- Copic opaque white ink
- Sakura white gel pen
- Clear embossing ink by Lawn Fawn
- Fine white embossing powder by Hero Arts
- Vellum by Lawn Fawn
- Clear jewels by Studio Katia
- Strathmore bristol smooth cardstock

Sunny Studio - Baby Elephants Dreamy Card

jeudi 12 mai 2022

Hello there,

I'm back on Sunny Studio blog today with another baby card, super sweet and precious, showcasing Baby Elephants.

I started off with the background. I cut a 5,5 x 4,25 inches bristol panel and picked three different oxide inks to create the base of my sky: peacock feathers at the bottom, blueprint sketch in the middle and wilted violet at the top. Next I wanted to add clouds to this background, but before creating them, I set the panel aside to dry and let the inks really soak into the paper.


So while the paper was drying, I stamped some cute elephants and stars from Baby elephants, a butterfly nest from Spring showers, and clouds from Balloon rides. As always I used the coordinating dies to cut them all, and used my alcohol markers to color everything.


Next I worked on my background panel again, and created clouds using a cloud stencil along with white pigment ink. On the bottom left corner of the panel, I white heat embossed my sentiment "Welcome baby girl", and then I attached my images using foam squares, glue dots and liquid glue.


Once all the images were attached, I added some final details: highlights using my white gel pen, I also added a bow from Passionate penguins on each elephant's head, and finally applied a coat of glossy accents on the star balloon to make it super shiny.


VIDEO



SUNNY STUDIO SUPPLIES
- Baby elephants stamp set
Spring showers stamp set
- Balloon rides stamp set
- Passionate penguins stamp set


OTHER SUPPLIES
- Spectrum Noir markers
- Graph'it brush markers
- Oxide inks: peacock feathers, blueprint sketch, wilted violet, chipped sapphire
- Sakura white gel pen
- Extreme black ink by My Favorite Things
- White pigment ink by Simon Says Stamp
- Clear embossing ink by Lawn Fawn
- Fine white embossing powder by Hero Arts
- Copic opaque white ink
- Cloudy stencil by Lawn Fawn
- Strathmore bristol smooth cardstock

Sunny Studio - Underwater Baby Card

jeudi 5 mai 2022

 Hi there,

I'm super happy to be back on Sunny Studio blog with more Summer Release inspiration! Today I'm showcasing the Inside greetings congrats stamp set on my card, I picked two sentiments from that set and created a sweet and fun underwater baby card.

The first thing I did was to stamp my cute shark family using an alcohol marker friendly black ink. The shark on the left is from Fintastic friends, and the one on the right and the baby are from Sea you soon. I cut them using the coordinating dies and colored them using my alcohol markers. And to fit the blue background I had in mind, I picked blue grey shades to color the sharks.


Next I cut a 5,5 x 4,25" bristol panel and used salvaged patina, peacock feathers and blueprint sketch oxide inks to create my underwater background.

I cut the Botanical backdrop out of navy cardstock to create underwater foliage, and white heat embossed my two sentiments from Inside greetings congrats on my panel: one in the top left corner and one in the bottom right corner. I stuck the foliage frame on the panel, I added highlights on the leaves using a white gel pen, and then I attached the shark family in the middle of the card using foam squares.


I added more highlights on the images, and finally I added a few clear droplets here and there to match the underwater theme and also fill up the empty spaces.


VIDEO



SUNNY STUDIO SUPPLIES
- Inside greetings congrats stamp set
- Fintastic friends stamp set
- Sea you soon stamp set
- Botanical backdrop die


OTHER SUPPLIES
- Spectrum Noir markers
- Graph'it brush markers
- Oxide inks: salvaged patina, peacock feathers, blueprint sketch
- Sakura white gel pen
- Copic opaque white ink
- Clear embossing ink by Lawn Fawn
- Fine white embossing powder by Hero Arts
- Navy cardstock by The Stamp Market
- Clear droplets by Gina K. Designs

Lawn Fawn - Father's Day Open Box Card

Hello there,

I'm super happy to be back on Lawn Fawn YouTube channel with this box card. I've created a busy scene with lots of cute images, and also added a little twist to make an underwater viewing gallery.

I started off by stamping and die cutting the images first, and I colored them using my alcohol markers. With all the khaki green shades (the box itself, cattails and grass sprigs...) I went with yellow shades to color the ducks to make them all pop in the scene.


Next I worked on the box card. I cut two panels out of a paper from the textured dot bright paper pack, and I want to keep the back of the box only, so on one of the panels I cut both flaps, and on the other one I cut the smaller flap only. I folded the different score lines on both pieces, and next I created the opening. And I invite you to watch the process video down below to see how it was done, it's always easier to understand such things with images ^^


Next I decorated the panels: a white rectangle, two Flower market squares, as well as an Into the woods rectangle. I attached those elements on the panels, and next I cut six insert pieces. I added double sided sticky tape on the tabs and also folded those tabs, I stuck those insert pieces and assembled the box card. I just left the front of the box card open to be able to stick some images under the water. And speaking of sticking images, I attached them all using 3mm glue dots.


Once all my images were attached, I closed and sealed the box card, and then I added some flies into the scene. I cut thin strips of acetate and stuck a fly at the end of each strip, and I attached those acetate strips inside the box card using glue dots.

I cut some Henry's ABCs letters to make the word "Dad", I also white heat embossed my sentiment on a black licorice banner, and also cut a white frame to make the underwater viewing gallery pop. I attached all those elements to totally finish my pop-up box card.


VIDEO



LAWN FAWN SUPPLIES

Stamp sets
- Rub a dub dub flip-flop
- Rub a dub dub
- You are sublime
- Dad + me
- Mermaid for you
- Ocean shell-fie
- Swan soiree
- Toadally awesome
- Beary happy holidays
- Let's play

Die sets
- Scalloped box card pop-up
- Large stitched rectangle stackables
- Small stitched rectangle stackables
- Stitched simple wavy borders
- Grassy border
- Flippin' awesome
- Henry's ABCs

Papers
- Flower market paper pack
- Into the woods remix paper pack
- Watercolor wishes paper pack
- Textured dot bright cardstock
- Textured canvas cardstock
- White cardstock
- Black licorice cardstock

Misc
- Clear embossing ink
- White embossing powder
- Glue dots
- Liquid glue


OTHER SUPPLIES
- Spectrum Noir markers
- Graph'it brush markers
- Sakura white gel pen

Sunny Studio - Wedded Bliss Mini Slimline Shaker Card

jeudi 28 avril 2022

Hey there,

Sunny Studio Summer release is finally available at sunnystudiostamps.com and I'm super happy to be back with a shaker card showcasing the adorable Wedded bliss mini stamp set. This wedded penguin couple is just so cute!

As always I started off with the coloring. I stamped the images using an alcohol marker friendly black ink, cut them all using the coordinating dies and used my alcohol markers to color everything.

Besides the Wedded bliss penguin couple, I stamped one of the Balloon rides banners three times, as well as a bunch of hearts from Fabulous flamingos. And to create my cute penguin cherub, I picked a penguin from Passionate penguins, and stamped a bird from Little birdie two times to use his wings only.


Next I created the shaker background. I cut a 6 x 3" panel out of a Flirty flowers pattern paper, and I cut a Stitched arch out of that panel. I white heat embossed my sentiment "Wishing you wedded bliss" from Wedded bliss at the top of my mini slimline panel, and then I attached the inside arch window remaining piece on a 6 x 3" card base using the open arch window panel as a guide.

I flipped the panel over and added liquid glue all along the arch window, I attached a piece of clear acetate at the back of my panel, and then, to create room for the shaker accessories, I added two layers of foam strips all along the arch window.

I made the foam strips edges non sticky using a powder tool, cleaned the acetate with a microfiber cloth, I also added more foam strips above the window and next I added a mix of jewels inside the window, and finally I placed my card base on the foam strips to totally close my shaker panel. And next I attached the images using 3mm glue dots.


And that's it, we have a super cute mini shaker card with a happy and elegant penguin couple and a cheeky penguin cherub throwing hearts at them. Don't hesitate to watch the process video for information. Thanks for stopping by and see you next week!


VIDEO



SUNNY STUDIO SUPPLIES
- Wedded bliss stamp set
- Passionate penguins stamp set
- Balloon rides stamp set
- Fabulous flamingos stamp set
- Little birdie stamp set
- Stitched arch die set
- Flirty flowers paper pack


OTHER SUPPLIES
- Spectrum Noir markers
- Graph'it brush markers
- Mini slimline die by Lawn Fawn
- Clear embossing ink by Lawn Fawn
- Fine white embossing powder by Hero Arts
- Sakura white gel pen
- Jewels by Studio Katia

Sunny Studio - Mother's Day & Father's Day Mini Cards

jeudi 14 avril 2022

 Hello there,

I'm back on Sunny Studio blog today with two super cute mini slimline cards featuring a bunny mom with her bunny kids and a panda dad with his panda kids.

I started by stamping the images using an alcohol marker friendly black ink. I stamped the bunny from Critters on the go, as well as the bear on the scooter two times. I turned one of the bears into a panda, and used the bunny head to turn the other bear into a bunny. I also stamped the bunny heads and bear heads from Balloon rides, the cart from Harvest mice and some tiny bows from Spring showers.

I colored all the images using my alcohol markers. And to make the pandas, I first divided the bear bodies and heads into several parts using a pencil, next I used a black memento pen to trace over those lines, and I colored the legs, arms, ears and eyes in black, leaving the remaining parts white.


After the coloring, I created two identical mini slimline backgrounds. I cut two 6 x 3 inches bristol panels and created a cloudy sky on each panel using a cloud stencil from my stash along with tumbled glass and salty ocean oxide inks.

Next I cut a 6 x 3 inches panel out of a green pattern paper from the Spring Fling paper pack, and used the grass border die from Picket fence to cut two grass borders out of this green pattern paper. And I attached a grass border on each panel using foam squares.


I cut some letters using the Chloe alphabet die set to make the words "Mom" and "Dad", I also stamped the second part of my sentiment on each panel, "Thanks for always being there" from Words of gratitude, and then I attached the images using a combination of glue dots and foam squares to stick the biggest images and liquid glue for the smallest ones such as the tiny bows.


VIDEO



SUNNY STUDIO SUPPLIES
- Critters on the go stamp set
- Balloon rides stamp set
- Harvest mice stamp set
- Spring showers stamp set
- Words of gratitude stamp set
- Chloe alphabet die set
- Picket fence die set
- Spring Fling 6x6 paper pack


OTHER SUPPLIES
- Spectrum Noir markers
- Graph'it brush markers
- Oxide inks: tumbled glass and salty ocean
- Sakura white gel pen
- Copic opaque white ink
- Large stitched mini slimline die set by Lawn Fawn
- Cloudy stencil by Lawn Fawn
- Colored cardstock by Lawn Fawn
- Extreme black ink by My Favorite Things
- Strathmore bristol smooth cardstock

Lawn Fawn - Sheep & Balls of Yarn Platform Pop-Up Card

Hey there,

I'm so happy to be back on Lawn Fawn YouTube channel with this new platform pop-up card featuring a cute little sheep inside a basket full of balls of yarn.

I started by creating the basket using a pattern paper from the Sweater weather 6x6 paper pack. And I also added Stitched scalloped borders all around the basket to give the illusion of a lacy doily. Please check the process video down below to watch the whole process ^^

Next I created colorful balls of yarn using pattern papers from the Flower market 6x6 paper pack. I also cut some colorful strings using Really high five coordinating dies, and cut more balls of yarn using a die from the Tiny gift box cat add-on. And I stuck all those pieces inside the platform pop-up basket using 3mm glue dots.


I used the Tiny gift box goat and llama add-on to create the sheep, and I wanted him to have a collar with a heart so I used a die from the Scalloped box card pop-up die set to cut a strip, and to make him very fluffy I used a die from Lift the flap meadow. And I also cut the heart for his collar using a die from the Stitched Cupcake die set. I assembled all the pieces, and then glued the sheep inside the basket.


And finally I created my sentiment. I cut some Henry's ABCs letters to make the word "Wool" out of a Knit picky pattern paper to stay in the fabric theme, and I used several stamp sets to make the second part of my sentiment: the word "Always" from Thanks a bushel, "Be" from Peacock before 'n afters, "my" from Holiday Helpers and "Friend" from the How you bean Christmas cookies add-on. I white heat embossed those words on a Black licorice Everyday sentiment banner that I stuck below the word "Wool" to read "Wool always be my friend".


VIDEO



LAWN FAWN SUPPLIES

Die sets
- Platform pop-up + add-on
- Tiny gift box goat & llama add-on
- Tiny gift box cat add-on
- Henry's ABCs
- Everyday sentiment banners
- Stitched scalloped borders
- Scalloped box card pop-up
- Lift the flap meadow

Stamp sets
- Thanks a bushel
- Peacock before 'n afters
- Holiday helpers
- How you bean Christmas cookies add-on

Papers
- Flower market 6x6 paper pack
- Sweater weather 6x6 paper pack
- Knit picky 6x6 paper pack
- Textured dot neutral cardstock
- Textured cardstock
- Black licorice cardstock
- Ballet slippers cardstock
- Fog cardstock
- Narwhal cardstock
- Chili pepper cardstock
- White cardstock

Misc
- Clear embossing ink
- White embossing powder
- Glue dots


OTHER SUPPLIES
- Sakura white gel pen
- Glossy accents by Ranger

Sunny Studio - Out On A Limb Magical Fairy Scene

jeudi 7 avril 2022

Hey there,

I'm back today on Sunny Studio blog with a magical slimline card featuring an enchanted tree I created using Out on a limb. I also brought more magic to my card by adding three cute fairies from Garden Fairy, and I started off by stamping those images using an alcohol marker friendly black ink and coloring them using my alcohol markers. I cut them all, and moved on to the background.

I cut an 8,5 x 3,5" bristol panel, taped a hill stencil at the bottom and created a night sky using blueprint sketch, chipped sapphire and black soot oxide inks. I applied the colors from the lightest at the bottom to the darkest towards the top of the panel, and as always I went back and forth with my blending tools to get a nice blending. Next I added a whole lot of texture and details to make this night sky all shiny with many stars. And to finish it, I added tumbled glass oxide ink on the bottom part.

Next I created the enchanted tree. I cut all the pieces out of different colored cardstock, and added shadows to each element using distress inks.

To sum up, the tree trunk + leaves are from Out On A Limb, I used clouds coordinating dies from Balloons Rides to make the foliage, butterflies coordinating dies from Bunnyville, and created flowers using dies from Pristine Poinsettia + Botanical BackdropOnce all the pieces were done, I assembled the tree on my night sky panel using liquid glue and foam squares.


I like to create custom sentiments, so I did it again on today's card. I created the word "Fairy" using the Chloe Alphabet die set, and picked some words from different sets to built my phrase: we have "Sending You" + "Wishes" from Happy Harvest, "Kisses" + "&" from Harvest Mice, and "Magical" from Garden Fairy. I stamped the words and attached the letters at the bottom of my card to read "Sending you fairy kisses & magical wishes", and then I stuck the fairies and wands.

At the end I stamped a few grass sprigs from Harvest Mice on the bottom part using blueprint sketch oxide ink, I added white details and highlights on the images and die cuts, and finally added some clear glitter on the fairies wings.


VIDEO



SUNNY STUDIO SUPPLIES
Out on a limb die set
- Garden fairy
- Bunnyville
- Balloon rides
- Harvest mice
- Happy harvest
- Pristine poinsettia die set
- Botanical backdrop die set
- Chloe alphabet die set
- Flirty flowers paper pack


OTHER SUPPLIES
- Spectrum Noir markers
- Graph'it brush markers
- Oxide inks: blueprint sketch, chipped sapphire, black soot, tumbled glass
- Distress inks: hickory smoke, black soot, peacock feathers, wilted violet, seedless preserves, picked raspberry, kitsch flamingo
- Copic opaque white ink
- Liquid stardust by Lawn Fawn
- Sakura white gel pen
- Hill stencil by Lawn Fawn
- Colored cardstock by Lawn Fawn & The Stamp Market
- Strathmore bristol smooth cardstock